ASTM A234 WP5/WP9 pero sueldan con autógena las colocaciones, CAMISETA ASTM A234 WP11/WP12/WP22/WP91 del CODO
Nombre de productos:
El codo, curva, igual/reduce reductor concéntrico/excéntrico de la camiseta, casquillo, reborde
) un OD: el 1/2” - 80"
b) Std: ASME, ANIS, ESTRUENDO, JIS, EN
c) material:. A234 WP12 WP11, WP22, WP5, WP9, WP91
PESO de d): SCH5-SCH160
instalaciones de tuberías de la extremo-soldadura del asme
el 1/2” - 24" inconsútil
4" - 48" soldadura continua
ANSI, ASME, ESTRUENDO, JIS, GOST, BS
30,45,90,180 SENIORES del grado, LR,
INSTALACIÓN DE TUBERÍAS
Gama de tallas: el 1/2 inconsútil” a 24"
costura weldding 4" a 48"
Material: wpb de acero de carbono ASTM A234, wpc; A106; st37.0; S235JR;
SS400; CT20, 20#; Q235A; Q235B
Estándar: ANSIB16.9, ASME B16.28; ESTRUENDO 2605, ESTRUENDO 2615, DIN2616,
DIN2617; GOST 17375; GOST 17378; JIS2311
Grueso de pared: 2M M----25M M
SCH5, SCH10S, SCH10, SCH20, SCH30, STD, SCH40,
XS, SCH60, SCH80, SCH100, SCH120, SCH140,
SCH160, XXS, SGP, LG,
| Material NO. | Contenido componente químico | Propiedades mecánicas |
| C | Manganeso | Si | S | P | Cr | MES | Ni | Resistencia a la tensión | Fuerza de producción | alargamiento |
| acero de carbono | A234WPB | ≤0.3 | 0.29-1.06 | ≥0.1 | ≤0.058 | ≤0.05 | | | | 415-585 | ≥240 | ≥30 |
| A420 WPL6 | ≤0.3 | 0.6-1.35 | 0.15-0.3 | ≤0.04 | ≤0.035 | | | | 415-585 | ≥240 | ≥30 |
| acero de aleación | A234 WP5 | ≤0.15 | ≤0.6 | ≤0.5 | ≤0.04 | ≤0.03 | 4-6 | 0.44-0.65 | | 415-585 | ≥205 | ≥20 |
| A234 WP11 | 0.05-0.2 | 0.3-0.8 | 0.5-1 | ≤0.030 | ≤0.030 | 1-1.5 | 0.44-0.65 | | 415-585 | ≥205 | ≥20 |
| A234 WP22 | 0.05-0.15 | 0.3-0.6 | ≤0.5 | ≤0.04 | ≤0.04 | 2-2.5 | 0.87-1.13 | | 415-585 | ≥205 | ≥20 |
| A234 WP91 | 0.08-0.12 | 0.3-0.6 | 0.2-0.5 | ≤0.02 | ≤0.015 | 8-9.5 | 0.85-1.05 | | ≥590 | ≥415 | ≥20 |
| acero de la tubería | A860 WPHY42 | ≤0.20 | 1-1.45 | 0.15-0.4 | ≤0.015 | ≤0.030 | | | | ≥415 | ≥290 | / |
| A860 WPHY52 | ≤0.20 | 1-1.45 | 0.15-0.4 | ≤0.015 | ≤0.030 | | | | ≥455 | ≥360 | / |
| A860 WPHY60 | ≤0.20 | 1-1.45 | 0.15-0.4 | ≤0.015 | ≤0.030 | | | | ≥515 | ≥415 | / |
| A860 WPHY65 | ≤0.20 | 1-1.45 | 0.15-0.4 | ≤0.015 | ≤0.030 | | | | ≥530 | ≥450 | / |
| A860 WPHY70 | ≤0.20 | 1-1.45 | 0.15-0.4 | ≤0.015 | ≤0.030 | | | | ≥550 | ≥485 | / |
| acero inoxidable | A403 WP 304 | ≤0.08 | ≤2 | ≤1 | ≤0.04 | ≤0.03 | 18-20 | | 8-11 | ≥515 | ≥205 | ≥30 |
| A403 WP 304L | ≤0.03 | ≤2 | ≤1 | ≤0.04 | ≤0.03 | 18-20 | | 8-13 | ≥485 | ≥170 | ≥30 |
| A403 WP 316 | ≤0.08 | ≤2 | ≤1 | ≤0.045 | ≤0.03 | 16-18 | 2-3 | 10-14 | ≥515 | ≥205 | ≥30 |
| A403 WP 316L | ≤0.03 | ≤2 | ≤1 | ≤0.045 | ≤0.03 | 16-18 | 2-3 | 10-15 | ≥485 | ≥170 | ≥30 |
| A403 WP 321 | ≤0.08 | ≤2 | ≤1 | ≤0.045 | ≤0.03 | 17-19 | | 9-12 | ≥515 | | |
